Install Driver on macOS via USB cable

Install Driver on macOS via USB cable
01

Before Driver Installation

Supported model: Y813BT

Check the model name on the bottom label.

Model: Y813BT
1

Connect the USB cable

Connect printer to your computer via USB cable.

2

Connect the power adapter

Attach the power cable to the power adapter, then connect it to the printer, and plug it into the socket.

3

Turn ON the printer

Turn ON printer.

If you encounter "run the 64-bit version" error or Error 1797, go to Start > Settings > System > About and check System typeIf it shows "ARM-based processor", please install the Windows ARM driver.
Windows ARM
Compatible
02

Download Windows ARM Driver

Supported model list: Y813 / Y813BT

Download the Windows ARM driver using the button below.

Download ARM Driver Backup Google Drive

If the Download ARM Driver button does not work, please use our Backup Google Drive link instead.

After downloading, unzip the file and run the installer. If the message “Do you want to allow this app to make changes to your device?” appears, please click “Yes”.

For Windows ARM-based devices only.
3

Windows ARM Driver Installation Guide

Follow these steps to install the Y813 / Y813BT ARM driver.

1

Choose install location

Use the default folder, then click Next.

2

Start installation

Click Install to begin installing the ARM driver.

3

Select model and port

Select Y813BT Label, click Get USB Port, then click Setup.

Note: If the printer is connected and turned on, Get USB Port can automatically fill the Port option.
4

Finish installation

When the message appears, click OK.

sure the printer is connected by USB and powered on before selecting the port.