Y813 Install Driver on macOS via USB cable

01

Before Driver Installation

Supported model: Y813

Check the model name on the bottom label.

Model: Y813

Please complete the following steps before installation.

1
Power adapter

Connect the power adapter

Plug the power cord into the wall outlet, then connect the other end to the round port on the printer.

2
USB connect laptop

Connect the USB cable

Connect the USB-A end of the cable to the adapter, then plug the adapter (USB-C end) into your computer.

3
Power button

Turn ON the printer

Turn ON printer.

02

Download the Driver

Before downloading the driver, please check your Mac's chip version.

Look for the 'Chip' line. If it shows Apple M1, M2, M3, or M4,
choose the M-series driver. If it shows an Intel processor,
choose the Intel-based driver.
Driver for M-series MacBooks Driver for Intel-based MacBooks
Note: select the driver based on your Mac's processor.
- Apple M-series chips (M1, M2, M3, M4, etc.): Use the M-series MacBook Driver.
- Intel processors: Use the Intel-based MacBook Driver.
Tip: If you're not sure, open About This Mac first and check the Chipinformation.
1

Click Apple menu > About This Mac

3

Install the Driver

Install Driver on macOS

Follow the steps below to complete the driver installation.

1

Open the downloaded file

Double-click the downloaded driver file to start the installation.

2

Handle the security warning

If a warning appears, click "OK" or "Done" to dismiss the message.

3

Allow the installer

Open System Settings > Privacy & Security, then click "Open Anyway". If more warning prompts appear, continue choosing the option that allows the installation.

4

Continue installation

In the installer window, click "Continue".

5

Install the driver

Click "Install" to begin installing the driver.

6

Finish

After the installation is completed, click "Close" to exit.

4

Check the Printer in System Settings

Finish installation and add the printer if needed

After the installation is completed, check whether the printer appears in Printers & Scanners.

1

Finish installation

When the installation is completed successfully, click "Close".

2

Open Printers & Scanners

Open "System Settings" and click "Printers & Scanners".

3

Add the printer

If the printer is not listed, click "Add Printer, Scanner, or Fax...".

4

Choose printer software

Select the USB printer, click the "Use" menu, then choose "Select Software...".

5

Select the driver

Choose "4Inch Label Printer", then click "OK".

6

Confirm success

When "Y813 Label" appears in the list, the printer is installed successfully.

Note:If your Mac automatically adds the printer after plugging it in, you can ignore the manual add steps.