Y813BT Install Driver on macOS via USB cable
Before Driver Installation
Supported model: Y813BT
Check the model name on the bottom label.
Please complete the following steps before installation.
Connect the USB cable
Connect the USB-A end of the cable to the adapter, then plug the adapter (USB-C end) into your computer.
Connect the power adapter
Attach the power cable to the power adapter, then connect it to the printer, and plug it into the socket.
Turn ON the printer
Turn ON printer.
Download the Driver
Download the printer driver using the button below.
Install the Driver
Install Driver on Mac via USB
Follow the steps below to install the Y813BT printer driver on your Mac.
Run the installer
Run "LabelPrinter-Mac-Driver-latest.pkg". Read the note, then click "Continue".
Select the disk
Installing this software requires 272 KB of space.
Start installation
Click "Install" to begin the standard installation.
Enter your password
If prompted, click "Use Password..." and enter your Mac password.
Check the Printer in System Settings
Finish installation and add the printer if needed
After the installation is completed, check whether the printer appears in Printers & Scanners.
Finish installation
When the installation is completed successfully, click "Close".
Open Printers & Scanners
Open "System Settings" and click "Printers & Scanners".
Add the printer
If the printer is not listed, click "Add Printer, Scanner, or Fax...".
Choose printer software
Select the USB printer, click the "Use" menu, then choose "Select Software...".
Select the driver
Choose "4Inch Label Printer", then click "OK".
Confirm success
When "Y813 Label" appears in the list, the printer is installed successfully.
